In the power supply system of seawater desalination equipment, do not overdo it, the road is boring, and prevent the use of flammable materials to place dangerous goods. If there is water seepage in the pipeline of the desalination equipment, the switching power supply of the desalination equipment should be disconnected, and the equipment can not work all the time.

Next, let's take a look at the entire fundamental process of desalination equipment cleaning:

1. Pump clean chlorine-free ro-RO water from the cleaning tank (or relative water resource) into the high pressure vessel and discharge it for more than 10 minutes.

2. Use clean commercial water to prepare a cleaning solution in a cleaning box.

3. Cycle the cleaning solution in a high-pressure container for 1 hour or a preset time.

4. After cleaning the desalination equipment, empty and flush the cleaning tank, and then fill the cleaning tank with water to further flush.

5. Pump the chlorine-free clean water (or related water resources) in the cleaning tank into the high pressure container and dry it for more than 10 minutes.

6. After cleaning the desalination plant, the RO reverse osmosis management system will run with the drain valve open until the water is cleaned and clean without foam or cleaning agent (usually 15 to 30 minutes).