Desalination equipment due to improper operation and equipment damage, many customers are not familiar with the operation process of reverse osmosis equipment, and because of the wrong operation steps, often damage the equipment. The operator strictly follows the operation instructions. If there are uncertain and unknown operation problems, the operator should contact the engineer in time to help complete the operation by telephone or send professionals to the scene.

Typically, the company will have tissue engineers walk through the equipment regeneration and flushing process one by one until the customer has a thorough understanding of it. Of course, in order to be on the safe side, it is very good to recruit the water department to handle the equipment operation process personnel or find someone to serve. After commissioning, our company will provide training for the operators.

After purchasing reverse osmosis equipment, they only care about daily production and use, do not pay attention to the daily protection of the equipment, do not pay attention to the equipment according to the requirements of the manufacturer's regular pre-treatment system has been refreshed.

Of course, there are also some non-professional equipment manufacturers that do not disclose their daily protection when selling and installing devices. It can be seen that when customers choose to buy reverse osmosis equipment, we will deepen communication with the manufacturer one-on-one, discuss the daily protection of the equipment, and select a reliable enterprise with spare parts supply and after-sales protection. This allows the equipment to be used properly.

Of course, the company will provide customers with professional protection and equipment protection in the third year, which is also an effective way to extend the service life of the equipment. Perhaps the membrane has been used for a long time, some membranes have been used for three or four years or more. The service life of the film should consider the water consumption and raw water quality, and the water consumption and raw water quality are usually proportional to the film life. The membrane element should be replaced or cleaned regularly. Membrane elements may be oxidized and the standard solution of the pretreatment wastewater may not be checked prior to installation into the system, resulting in excessive residual chlorine or other oxidizing agents flowing into the membrane system

The results show that the desalting rate of the membrane element decreases. If the membrane itself is of poor quality. For example, the price should be as low as possible, and it is difficult to guarantee the quality and service life of films without quality assurance. In this case, the selection of suitable qualified equipment suppliers is particularly important.